AAS Industrial Robotics and Automation Technology
Academic Plan Code
The Associate in Applied Science (AAS) in Industrial Robotics and Automation Technology prepares students to work with a variety of automated electro-mechanical, product assembly, process control, and product distribution systems that use programmable controls and other methodologies to accomplish system management. These systems utilize, but are not limited to, robotic, mechanical, hydraulic, pneumatic, electronic, optical, and thermal devices. The Automation Technician will gain the skills through this program to define, integrate, install, program, and maintain complex control systems.
Course Sequence by Term
The following is a suggested course sequence by term for the pathway. Students should keep in mind the items below that affect their success in completing the pathway as listed:
- The course sequence is laid out by suggested term. It is understood that students may enter the program at different times of the year.
- Academic achievement is related to initial course placement determined by course placement tests, completion of 100-200 level course pre-/corequisites, any courses below 100 level, and program prerequisites.
- Students should meet with an academic advisor, or program director, or counselor who can assist in assessing student needs that may affect course enrollment. Appropriate resources can be discussed and agreed to in order to address student needs and support successful course completion.
Program Area Key:
- Critical Rdg = Critical Reading
- FYC = First Year Composition
- HUM = Humanities, Arts and Design
- Mathematics = Mathematics
- NS = Natural Science
- Oral Comm = Oral Communication
- PP = Program Prerequisite
- SB = Social-Behavioral Sciences
- RC = Required Courses
- RE = Restricted Electives
Students must earn a grade of "C" or better for all courses required within the program.
|RC||ATP100||Introduction to Manufacturing and Programmable Logic Controllers||3|
|RC||ATP106||Industrial Electrical Systems||3|
|RC||ATP111||Mechanical Systems and Maintenance||3|
|FYC||ENG101||First-Year Composition||Prerequisites: Appropriate writing placement test score, or a grade of "C" or better in ENG091 or ESL097.||3|
|RC||ATP201||Programmable Logic Controller (PLC) Systems||Prerequisites: A grade of C or better in (ATP100 and ATP106) or permission of Instructor.||3|
|RC||ATP205||Electric Motors and Controls||Prerequisites: A grade of C or better in (ATP100 and ATP106) or permission of Instructor.||3|
|RC||ATP210||Process Control||Prerequisites: A grade of C or better in (ATP100 and ATP106) or permission of Instructor.||3|
|FYC||ENG111||Technical and Professional Writing||Prerequisites: ENG101 with a grade of C, or better, or permission of Instructor.||ENG102 is acceptable only if ENG111 is not available||3|
|Intermediate Algebra or
Intermediate Algebra or
|Prerequisites: An appropriate mathematics placement score, OR a grade of "C" or better for MAT090, or MAT091, or MAT092, OR (an appropriate diagnostic score, or a grade of "C" or better in each of the following courses: MAT055, MAT056, and MAT057).||OR equivalent or satisfactory completion of a higher level mathematics course||3–5|
|RC||ATP123||Electrical Wiring J-STD Soldering Certification||Prerequisites: Permission of Instructor.||3|
|RC||ATP215||Automation System Integration||Prerequisites: A grade of C or better in (ATP201, ATP205, and ATP210) or permission of Instructor.||2|
|RC||ATP225||Robotics Operations and Programming||Prerequisites: A grade of C or better in (ATP201, ATP205, and ATP210) or permission of Instructor.||3|
|RC||CIS105||Survey of Computer Information Systems||3|
|Industrial Safety or
Industrial Safety or
|Orall Comm||COM110||Interpersonal Communication||3|
|Critical Rdg||CRE101||College Critical Reading and Critical Thinking||Prerequisites: (A grade of C or better in ENG101 or ENG107) and (appropriate reading placement test score or a grade of C or better in RDG095 or RDG100 or RDG111 or RDG112 or RDG113 or permission of Instructor).||OR equivalent as indicated by assessment||3|
|HU||Humanities & Fine Arts||Any approved General Education course in the Humanities & Fine Arts area||3|
|SB||Social and Behavioral||Any approval Social and Behavioral||3|
|NS||Natural Sciences||Any approved General Education course in the Natural Sciences area||4|
Ready to get started?
Follow one of the options below to get started on your personal career pathway.
Click here for MCC's easy-to-use Enrollment Steps.
Learn more about and find contact information for the Automation Technology program.
Ask general questions over the phone at 480-461-7400 or via online chat.
All information is administered by the Center for Curriculum and Transfer Articulation at Maricopa County Community College District and published is subject to change without notice. Every effort has been made to ensure the accuracy of information presented, but based on the dynamic nature of the curricular process, course and program information is subject to change in order to reflect the most current information available.